In this package deal is a UC300ETH ethernet motion controller along side a UCBB1 break out board including 2x ribbon cables and a FREE UCCNC lisence file to match the controller.

 

The UC300ETH-5LPT is a motion controller with ethernet interface. The device can
communicate with a connection to the control computer's network card. The connection can
be built with direct connection or via router/switch devices.
The device can be used to control machine tools with stepper or servo motor controls with
step and direction interfaces.
The controller can output a maximum of 400kHz stepping frequency and can work with
upto 6-axes.

 

The UCBB is a dual port signal breakout board making the wiring and connections to 2 LPT ports
or to 2 ports on a motion controller easy.
One of the ports has standard LPT port pinout and the second port has a pinout of an input type LPT
port where the pins 2. to 9. are inputs instead of outputs.
The exact pinout of the ports are described in details in this manual.
The board has a total of 16 outputs and 18 inputs.
All I/Os are optically isolated with fast 10Mbit/sec speed optocouplers.
The outputs are capable to drive 24V voltage levels and upto 1Amps of current with integrated N-
channel power mosfets.
The inputs are also optically isolated with fast 10Mbit/sec speed optocouplers and are capable to
interface to outputs of sensors and switches with NPN, PNP, push-pull and line driver outputs.

 

 

UC300ETH + UCBB1 inc 2x cables + Free UCCNC Lisence file package

£260.00Price
VAT Included